Drop Link Ring

How to measure at home:

Option 1:

1. Use a tape measure, a piece of string, or a strip of paper.
2. Wrap it around the finger you will wear the ring on and mark the place where it joins.
3. Lay your string or paper strip on a flat surface and use a ruler to measure the length up to the mark. Then go to our Size Chart and match the measurement to the closest ring size.
4. In case you need a half size, please write down the size in the message box at checkout.

Option 2 – measure an existing ring:

1. Choose a ring that fits well on the finger. Please be aware that the left and right hands might differ.
2. Measure the interior diameter of the ring in millimeters.
3. Use our Size Chart and match the measurement to the closest ring size.

A few things to keep in mind:

• The dominant hand is usually slightly larger – make sure you measure the intended finger on the correct hand.
• Be aware of the width of the ring you are going to wear. The wider the ring, the larger size you might need for it to fit you comfortably.
• For the Fat Knot ring and Loose Knot ring, we recommend ordering one size smaller than your regular size. We have stated the recommended sizes in our size chart.
• For the Infinity Loop Ring we recommend ordering one size larger than your regular size. We have stated the recommended sizes in our size chart.
• If you’re planning to stack a ring with another – keep in mind where on the finger the ring would sit and measure it there.
• Your body temperature can affect the size as well. This is very individual, but hands tend to shrink when it is cold and swell when it is hot. Try to measure the finger at a normal body temperature.

We are here to help

If you need further guidance, our customer service is always here to help. Simply send us a message or email shop@engelbertstockholm.se